What is the difference between the material of high power fiberglass mesh tape and glass
Dec 14,2021
The main material of high power fiberglass mesh tape and glass is not much different, mainly due to the different material requirements during production, so there are some differences in the formula. The silica content of flat glass is about 70-75%, and the silica content of glass fiber is generally above 60%.

Glass is an inorganic material melted at a high temperature (above 800 degrees, and daily glass is generally melted at 1100 degrees.), below the softening point temperature, there will be no chemical changes. Above the softening point temperature, it just softens, melts, or decomposes, without burning.
High power fiberglass mesh tape draws glass into very fine glass filaments, and the glass filaments have very good flexibility at this time. The glass filament is spun into yarn, and then it can be woven into glass fiber cloth through a loom. Because the glass filaments are extremely thin and the surface area per unit mass is extremely large, the temperature resistance performance is reduced. It's like using a candle to melt thin copper wires.
But glass does not burn. The burning we can see is actually to improve the performance of the high power fiberglass mesh tape, and the resin material coated on the surface of the high power fiberglass mesh tape, or the attached impurities. After pure high power fiberglass mesh tape or coated with some high temperature coatings, it is possible to make products such as fire-resistant clothing, fire-resistant gloves, and fire-resistant blankets. However, if you touch the skin directly, the broken fibers will irritate the skin and it will be very itchy.
Hot Tags:
Contact Us
E-mail:
Phone/WhatsApp:
Address:
Meizhuang Village, Jieguan Town, Wuqiang County, Hengshui City, Hebei Province, China